UltraBright™ Industrial Series CRI80+ LED Strip Light
Introduction:
To surpass industry standards, we made the brightest LED strip light on the market. Our upgraded UltraBright™ Industrial Series is now available in CRI80. Continuing to redefine and push the limits of LED strip lighting, it emits a staggeringly high output of up to 1,156 lm/ft. These lights are made with innovative 2835 SMD chips that are brighter, smaller, and much more efficient than other chips. The features of each strip cater to our high-end clients for specific project needs.
| Note: This product has been discontinued and will not be restocked. Check out the updated version here. |
Top Features and Benefits:
-
✔ High efficiency of 6.6 Watts/ft
-
✔ High output up to 1156 lm/ft
-
✔ Fully dimmable
-
✔ 50,000 hour lifespan (8 hours/day for 17 years)
-
✔ 7-year warranty
-
✔ UL Listed (cULus) E362522
Applications and Use:
These strips are installed in a wide variety of applications including:
-
• High brightness lighting
-
• High-output custom lighting fixtures
-
• Manufacturing areas
-
• Signage and advertising
-
• Exteriors (protected from elements)
-
• Horticulture and botany
-
• OEM applications
-
• Indirect cove lighting
-
• Edge lighting
Brightness Level
Check out our White Output LED Strips Page to compare the output levels of our Static White Strips.
At 1156 lumens per foot, this extremely high-output strip is perfect for commercial and industrial applications.
Available Colors (CCTs):
Why choose Industrial™ Series CRI80+ ?
If you want the brightest strip on the market, look no further. This strip boasts an uncanny output of 1,156 lm/ft with cut marks at every 1½” for intricate customization for high-end projects. The old Industrial Series was good enough for NASA, so we’re excited to see where this strip will end up.
Examples of what the Industrial™ Series can do to your space
Office Lighting
High Brightness Commercial Lighting
Ceiling Lighting
Display and Showcase Lighting
Specifications:
-
✔ Extremely high output up to 1,156 lm/ft
-
✔ High CRI up to 85
-
✔ Efficacy up to 173 lm/W
-
✔ 6.6 Watts/ft
-
✔ 50,000-hour lifespan (8 hours/day for 17 years)
-
✔ Available in 24V
-
✔ Max run length in series: 9'10" (12V); 19'8" (24V)
-
✔ LED type: SMD 2835
-
✔ 12V can be cut every 1 1/4" (32 mm)
-
✔ 24V can be cut every 2 1/2" (64 mm)
-
✔ Short LED pitch 5/16" (8 mm)
-
✔ 36 LEDs/ft (120 LEDs/m)
-
✔ Single-bin selection (3-step MacAdam)
-
✔ 3M VHB 4930 adhesive
-
✔ 120° beam angle
-
✔ Width: 3/8" (10 mm)
-
✔ Height: 1/16" (2 mm)
-
✔ Double-layer 4oz pure copper PCB
-
✔ Operating temperature: -4ºF-104ºF (-20ºC-40ºC)
-
✔ UL Listed (cULus) E362522
| Product SKU | Color CCT | Lumen / Foot (Meter) |
Luminous Efficacy (Lumen / Watt) |
CRI | Gamut Score Rg |
Relative Fidelity Score Rf |
| UB-IS-30K80C | 3000K | 1048 lm/ft (3439 lm/m) | 160 | 85 | 96 | 86 |
| UB-IS-35K80C | 3500K | 1156 lm/ft (3793 lm/m) | 170 | 85 | 96 | 85 |
| UB-IS-50K80C | 5000K | 1026 lm/ft (3366 lm/m) | 173 | 85 | 93 | 84 |
| UB-IS-62K80C | 6200K | 1068 lm/ft (3503 lm/m) | 166 | 85 | 91 | 83 |
Certifications:
Aluminum Channels
Compatible Aluminum Mounting Channels
Dimmers and Home Automation
Compatible Dimmers and Controllers
Connectors
Power Supplies
Non Dimmable Drivers
Flexfire LEDs® Plug-in Power Supply
Mean Well™ HLG and LPV Hardwired Power Supplies
Dimmable Drivers
Zurik® Universal Dimmable Driver
Zurik® EMLV Dimmable LED Driver
Lutron Hi-Lume Dimmable Driver
UltraBright™ Industrial Series CRI80+ LED strip light FAQ:
Q: Which power supply do I need for my (x) feet of LEDs?
The length of LED strip lights of your project will determine the size of the power supply you need. View our Power Supply chart to find the exact LED power supply you need.
Q:What is CRI and TLCI and why should I care?
Color rendering index (CRI) measures how colors are correctly rendered under a light source in comparison to natural sunlight. The index is measured on a 0-100 scale with 100 being a perfect rating of color accuracy, meaning the colors appear as they naturally would under unadulterated daylight. The bottom line: the higher the CRI, the higher quality is the light source.
95 - 100 → Phenomenal color rendering. Colors appear as they should, subtle tones pop out and are accented. All skin tones look beautiful and art comes alive as backsplashes and paint show their beautiful, full saturation.
90 - 95 → Great color rendering! Colors pop out, look vibrant and are easily distinguishable. Noticeably great lighting starts at a CRI of 90.
80 - 90 → Good color rendering. Though most colors will render well, you may not see items as fully saturated as you would like, but most people will not notice.
60 - 75 → Poor color rendering. Items and colors look desaturated, dull, toneless, and at times unidentifiable (cannot see the difference between black and navy-colored socks).
Q: What is the product warranty?
Because of our unyielding confidence in the quality of our product, we offer a 7-year warranty on our UltraBright™ Industrial Series LED strip lights. For more info, please read our warranty policy.
Q: What is color temperature (CCT)?
The color of light can be quantified by referring to its color temperature. White light is measured in Kelvins (K). Most white lights fall in a spectrum between 1800K and 6200K. When dropping below 3000K, the light becomes noticeably warmer. On the other end of the spectrum, the lights become cooler and emit a blue-ish tint as they rise above 6500K.
It is important that you choose a color temperature that compliments the style, mood, or intention of your space. We recommend using warmer tones for accent or ambient lighting while using cooler tones in high-traffic, industrial or task-specific areas. Speak to one of our lighting experts if you need guidance.
Q:What is the lifespan of your strip lights?
Our lights have been rigorously tested and have an expected lifespan of 50,000 hours before dropping to 70% luminosity. This means that if you were to use your lights 12 hours a day, every day, the lights would be expected to last longer than 10 years. Even after that time has elapsed, the lights will maintain a brightness of 70%. Higher-output strips require a heat sink to reach the expected lifespan and beyond.
Q: What are lumens (lm)?
This is a quantifiable amount of light produced by an LED strip or other light-producing product, as seen by the human eye. In other words, this is one way we can measure how much light is produced. When comparing LED strip lights, you want to compare the lumen output as well as the CRI, watts/foot, warranty, and bin selection.
Q: Is there an outdoor option?
No, we do not have an outdoor version of the UltraBright™ Industrial Series. However, we have many other high-quality outdoor IP65-rated LED strip lights you can choose from.
Q: What is the maximum run length of the UltraBright™ Industrial Series lights before voltage drop?
We have engineered this strip for a long run length in relevance to the extremely high output. The maximum continuous line of lighting in series is 9’10” for 12V and 19’8” for 24V versions. Longer connections are possible in parallel with the correct power unit.
Q. What do I need to turn on my lights?
As these lights operate on low voltage, you first need to purchase a 12V, 24V power supply depending on your setup. The type of power supply may vary, depending on if you want to be able to control or dim your lights with a dimming system. We recommend using our solderless grip connectors to make connections after cutting the strip to length if needed. If you are familiar with soldering, you can go ahead and do so to make more permanent connections, but please test your expertise on a small segment of strip before committing to solder your entire project.
Q: How do I mount the lights?
The 3M double sided adhesive that is found on the back of the LED strip allows you to install them in most locations. Be sure to thoroughly clean the surface to remove all dust and particulate matter before mounting the strip. Certain surfaces may require you to take additional measures to secure the strips lights into place. Feel free to call us with any questions.
Q: Can I cut the strips myself?
Yes, our LED strip lights are made to be cut to your desired length. Using sharp scissors, you can cut this strip every 1¼” for the 12V and 2½” for the 24V version of both CRI80+ and CRI90+ versions. You’ll see the cut marks printed on the surface of the strip.
Q: What is a 2835 SMD LED chip?
Made with newer technology, 2835 SMD (Surface Mounted Diode) chips are more efficient and can be much brighter than other SMD chips. The number 2835 refers to the size of the chips, which measures at 2.8mm x 3.5mm. This compact size makes for exceptional discreet lighting. Click here for more information on LED chip sizes.
Q: What is the importance of UL Listed?
The Underwriters Laboratories (UL) are an independent, not-for-profit organization that focuses on evaluating products for safety certification. This means you can use and install these LEDs in commercial spaces, industrial applications and in your home knowing that these are safe products..
More Information on LED Strip Lights:
Top 4 "need to know facts" about LED strip lights before purchasing - With a wide range of quality and price points in the market, it is important to educate yourself before buying.
90% of our customers found this page useful in selecting their LED strips
LED Strip Lighting Examples - The versatility of LED strips can be seen in the variety of projects our clients have completed. Looking for ideas? LED lighting example projects
Need assistance with your project or purchase? Our design specialists are ready to help.
Contact Us
Downloads:
Installation Guide
General LED Strip Installation Guide
Solderless Connector Guide
Solderless Connectors Installation Guide
Data Sheet
UltraBright Industrial Series CRI80+ LED Strip Spec Sheet
IES / LDT Files
3000K IES / LDT | 3500K IES / LDT | 4000K IES / LDT | 5000K IES / LDT | 6200K IES / LDT
Photometric Reports
3000K | 3500K | 4000K | 5000K | 6200K
Goniophotometer Reports
3000K | 3500K | 4000K | 5000K | 6200K
