Endeavor™ 120V Cove Light Accessories
Description
Accessories:
- Choose the 6 ft plug-and-play power cable to power a fixture or group of fixtures if you prefer to plug directly into a standard 3-prong 120VAC outlet.
- Select the 6 ft hardwire power cable if you would rather hardwire all of your connections. You will need the junction box accessory if you decide to go the hardwired route.
- The 6 inch long 6 inch jumper cable can be used to go around turns or corners, small jumps, or gaps in your project when attaching (daisy-chaining) fixtures together.
- Add a junction box for hardwired installations for hardwired installations to safely make connections to line voltage and stay NEC compliant.
Features
- Compatible with Endeavor™ 120V Cove Light Fixtures
- Easily power each fixture or a group of fixtures
- Ability to choose between plugging-in or hardwiring
- IP20-rated for indoor use
Specifications:
- 120VAC / 50~60 Hz input voltage
- IP20-rated for indoor use
- 6 ft plug and play power cable: 72” x 1" x ⅞” (182.8 x 2.5 x 2.2 cm)
- 6 ft hardwire power cable: 72" x ⅝” x ⅜” (182.8 x 1.5 x 1 cm)
- 6 inch jumper cable: 9 ¼” x ⅝” x ⅜” (23.4 x 1.5 x 1 cm)
- Junction box for hardwired installations: 3 ½” x 1 ½” x 1 3/16” (8.9 x 3.8 x 3 cm)
Endeavor™ 120V Cove Light FAQ:
Q: What are the advantages of these accessories?
The Endeavor™ 120V Cove Light accessories give you the ability to easily power each fixture or a group of fixtures either with a plug-in connector or a hardwire connector. The jumper connector gives you the flexibility of going around corners, small jumps, or gaps without having to start a new run. The junction box allows your installation to stay NEC compliant.
Q:How do I choose between the plug and play cable and the hardwire cable?
Choose the plug and play power cable if you wish to power a fixture or group of fixtures by plugging the lights into an existing outlet. On the other hand, select the hardwire power cable if you prefer hardwiring directly to 120VAC.
Q: Which connector should I use for corners in my project?
Turn any type of corner, small jump or gap with the 6-inch jumper cable.
Q: Can I use my own junction box with this product?
To meet UL requirements, hardwiring this product requires the Endeavor™ Junction Box.
Q: Is there an outdoor option?
No, we do not offer an outdoor-rated version of our Endeavor™ 120V Cove Light or its accessories.
