Get Free Advice

Talk to Lighting Experts

  • Project Design Services
  • Product Selection Help
  • and More!

Flicker-Free Single Color LED Controller

MSRP: $27.99
(You save $12.99 )

Tiny Wireless Dimmer and RF Remote for Single Color LED Strip Lights


The Single Color tiny LED strip light controller has an ultra-small design and is very powerful. It operates on 5V DC to 24V DC, so it will work with any of our 12V and 24V single color LED strip lights. Although it's small, it can handle a power load up to 15 amps. If you compare that to other LED Control systems, you will notice that it has a higher amperage maximum for a much lower price.

With the ability to smoothly dim and create 8 dynamic effects, this remote is extremely versatile and is small enough to be stored out of sight. Your single color LED strip lights can easily be connected to the SC-RF-SXR2 remote and an accent or effect can be added within 5 minutes just about anywhere. We recommend adding a piece of Velcro to the back of the controller and placing it in hard to see, but easy to reach places. 

RF= Radio Frequency. You do NOT need line of sight for the lights to change and the signal can pass through walls

The SC-RF-SXR LED control system has many modes including:

  • Dimming
  • Strobing
  • Fading 
  • Static
  • 8 Dynamic effects 
  • 10 Dynamic speed levels
  • 10 Brightness levels


Flicker free remote functions

1. Turn on/Standby button

Press the  ‘I’ key to turn the controller on, or press the ‘O’ key to turn it off. The controller can memorize and restore its setting next time you turn it on. 

2-3. Brightness buttons

Press BRIGHT+ to increase brightness and press BRIGHT- to decrease it. The setting will switch to a static color mode If either key is pressed while set to a dynamic color mode.

4. Dimmer Shortcuts

Set intensity to 100%, 50%, or 25% brightness.

5-6. Switch Dynamic Modes

Switch to dynamic mode from static mode, or switch between different dynamic modes.

7-8. Speed buttons 

Adjust the running speed of dynamic modes. Press SPEED+ to increase speed and press SPEED- to decrease it. e setting will switch to a dynamic mode If this key is pressed while set to a static mode.

  • Single color LED strip light remote control Input voltage: 5V to 24DC

  • 8kHz for flicker free operation
  • Output Current: 15A
  • Output Power: 180 watts (12v input) 360 (24v input)
  • Remote Frequency 433.92MHz
  • 2-year warranty
  • Auto recall function
  • Working Temperature: -30 to 60 deg C
  • IP68 rating (for the receiver)
  • Dimensions for the receiver: 3 1/2" x 7/8" x 3/8" (87mm*21mm*8.5mm)
  • Dimensions for the remote: 1 5/8" x 3 1/2" x 1/4" (40mm*86mm*6.5mm) 


coming soon


coming soon

Related Products

Enter Your Email for an Instant 10% OFF Your First Order