Categories

Site Information

behars Loading... Please wait...

Categories

  • KLUS KOPRO Anodized Extrusion (KL-B6367ANODA-1M)
  • Image 2
  • KLUS KOPRO Anodized Extrusion (KL-B6367ANODA-1M)
  • KLUS KOPRO Anodized Extrusion (KL-B6367ANODA-1M)
  • Not included with extrusion
  • Not included with extrusion
  • Not included with extrusion

KLUS KOPRO Anodized Extrusion

$21.50
SKU:
KL-B6367ANODA-1m
Shipping:
Calculated at checkout
Quantity:

Product Description

KLUS KOPRO Anodized Extrusion (KL-B6367ANODA-1M)

KOPRO extrusion by KLUS and Flexfire LEDs

Note: Cover and end caps not included with extrusion, links to their respective product pages them below 

Introduction 

The KOPRO extrusion is designed to build universal interior lighting fixtures. This extrusion directs the light beam at an angle of 45° so you can achieve the effect of  mild accent illumination and avoid glare. It is to be mounted in corners (e.g. bodies of furniture, cabinets, where ceiling meets wall, shop windows).

The extrusion can also serve as a wall lamp fixture. The KOPRO extrusion can be mounted with screws or bolts (suitable for a particular substrate) screwed into the walls of the extrusion which are not intended for LEDs. Holes for the bolts or screws should be drilled in places designated by the lines inside the extrusion. In drywall ceilings, the extrusion can be fixed using GP mounting springs.

The KOPRO extrusion can also be mounted using mounting adhesives. After the extrusion has been mounted, a shallow ‘tray’ is formed which can be used to route the power cables.The extrusion can be additionally equipped with two 10mm wide LED strips or one LED strip with a width of no more than 20 mm. 

To make sure your LED Strip is compatible with this extrusion check out our KLUS Compatibility Chart. 

SPECIFICATIONS 

SKU KL-B6367ANODA-1M
LED Strip Compatibility All Flexfire LEDs LED strip lights
Material Anodized aluminum
Cover Polycarbonate -
Standard Length 1 Meter (3.2 Feet)
Style Flat with flush lip
Mounting GP Surface Springs (KL-00293), Double Sided Tape, Liquid Adhesive, or Screws Through the Bottom of the Extrusion into the Mounting Surface
Accessories

KOPRO-L cover (KL-17092)
KOPRO-L end cap (KL-24116)
GP Spring (KL-00293)

IP20 (standard) with end caps and cover

DOWNLOADS

Download Data Sheet

Download Klus Data Sheet

Klus Compatibility Chart

ACCESSORIES

End caps

KOPRO L End Cap 

Channel Covers  

KOPRO L Cover

Mounting Bracket

KLUS GP Surface Spring (for GIP, GIZA, KOPRO) 

GIP Mounting Bracket

Product Reviews


Specifications for this Hybrid LED light kit

Product Hybrid Bright White/Warm White LED Strip Light
Color Temperature 2900K for Warm White and 6500K for Bright White
Lumen (Brightness) 3450 Lumens per reel
Quantity per unit You will receive a continuous 16ft section of lights
UL Listed? Yes UL Listed, Must be used with class 2 power transformer
Working Voltage 12v DC
Dimmability Fully Dimmable
Beam Angle 120 Degrees
Rigid or Flexible?

-Flexible installation up to 90 degrees. Used on curved surfaces

Power consumption 2.92 watts per foot
UV emission No
LED Count per reel 600 LEDs
Warranty

2 years

Back to Top