Loading... Please wait...

Call 1-844-FLEXFIRE

LED Lighting Products

Sign up for discounts

LED Light Dimmer for Strip Lights

  • LED Strip Light Dimmer
0.19 LBS
Calculated at checkout

Product Description

 LED Dimmer for LED Strip Light -  12V/24V 8A

This LED light dimmer can control the brightness of your LED strip light. Since all of our LED flex strips are very bright (especially our UltraBright™ LED strip lights), it may be necessary to dim the LEDs to achieve the desired result. The dimming range is 100% brightness to zero.

The LED dimmer requires 12V/24V DC input to operate, can handle 1 channel up to 96W of power. Wires are easily secured with screw down style connections. The LED dimmer can be used to dim LED lights, modules, and ribbon with 12V/24V DC constant voltage power requirements. This dimmer should not be used with our RGB LED strip light, as the control for the RGB light has a dimming function already available.


Operation temperature: -20-60°C
Input Voltage: 12V/24V DC In and out
Weight: 86g
Size: 94 x 64 x 64 mm [3.7'' x 2.52'' x 2.52'']
Max. load current: 8 Amp 
Input voltage must be 12V/24v DC

Want to be an LED distributor? Please contact us! distribution@flexfireleds.com

Write your own product review

Product Reviews

Showing reviews 1-3 of 8 | Next

  1. Nice 1st LED dimmer

    Posted by on

    This project was my first LED wiring experience. I was putting a run above kitchen cabinets and below them above the counter. I needed two, plus I learned that I needed a power supply for each run. You can't use one dimmer for two runs; lights flicker when power is lowered.

    I wish the dimmers would have had installation screws included in the shipping, thus a 1 star deduction. I had to search high and low through coffee cans of screws, nuts and bolt.

  2. Works great

    Posted by on

    It could be smaller, but it works great and no flickering.

  3. Performed well

    Posted by on

    This dimmer works very well. I like the direct connections and the ability to remove the connector adapter. The adapter was slightly loose on 1 of 5 units and this is the only reason for a rating of 4 vs a 5. The units could be a little smaller but were easily hidden under the cabinets.

Showing reviews 1-3 of 8 | Next

Warranty Information

2 year warranty