Get Free Advice

Talk to Lighting Experts

  • Project Design Services
  • Product Selection Help
  • and More!

UltraBright™ Render Series LED Strip Light - High CRI 98 - High TLCI 99

$120.00 - $239.00

high CRI and TLCI Render Series LED Strip Lights

UltraBright™ Render Series LED Strip Light

Introduction:

Boldly built to mimic pure, unadulterated daylight, the UltraBright™ Render Series boasts a spectacularly high CRI, TLCI, R9 and R13 values. This full-spectrum LED strip light exposes the true colors and saturation not normally seen under low CRI lighting. The high output up to 870 lm/ft guarantees brilliant brightness so every intricate detail and specific shade looks sharp. Perfect for professional-grade studio lighting and high-level accent lighting for film, photography, fashion, art, and more. Using top-quality components and single BIN selection, long-lasting consistency is guaranteed. This series is available in 12V and 24V and comes with a 7-year warranty. Heat sink recommended.

Top Features and Benefits:

high brightness LED Strip Light 870 lm per foot      low energy consumption LED strip lights    render-series-led-strip-light-high-run-length.jpg     render-series-led-strip-light-high-cri-lighting-up-to-98

  • ✔ High CRI up to 97 and TLCI up to 99

  • ✔ High efficiency of  6.6 Watts/ft

  • ✔ High output up to 870 lm/ft (2852 lm/m)

  • ✔ Available in 12V and 24V

  • ✔ Fully dimmable

  • ✔ Can be used to comply with Title 24 JA8

  •  50,000 hour lifespan (8 hours/day for 17 years)

  • ✔ 7-year warranty

  •  UL Listed (cULus) E362522

Applications and Use:

These strips are installed in a wide variety of applications including: 

  •  High-level accent and task lighting

  •  Photography, film and art lighting

  •  Museum and gallery lighting

  •  Bar and restaurant lighting

  •  Hotel lighting

  •  Luxury brand, retail and display lighting

  •  Casino lighting

  •  Theater lighting

  •  Mercandising

Brightness Level

Check out our White Output LED Strips Page to compare the output levels of our Static White Strips.

At 870 lumens per foot, this high-output strip is perfect for task lighting.

high brightness Render Series LED Strip Light

Available Colors (CCTs):

3000K and 3500k LED white CCT color temperatures render-series-led-strip-light-cct-color-temperature-natural-brighter.jpg

Why choose Render™ Series?

This strip is created to visually elevate any surface the light touches - every splash of color, curved groove, and sharp angle will pop and come alive under the Render Series. Choose this strip if you want to make a statement. From showcasing paintings and photographs to lighting up runways and museums, the Render Series is not for the faint of heart. The flawless color rendering optimizes every shade and reveals its full potential. No more dull palettes, faded backsplashes, unsaturated photographs, or bland videos.

render-series-led-strip-light-long-lasting-warranty-lighting.jpgrender-series-led-strip-light-high-tlci-lighting.jpgrender-series-led-strip-light-high-r9-r13-lighting.jpgrender-series-led-strip-light-ja8-title24-compliant-lighting-t24.jpg

 

*Title 24 is regulated for lamps with color temperatures 4000K and below

 

Examples of what the RenderSeries can do to your space

  

retail store lighting using LED strip lights with high CRI

 Retail Lighting

 

display and showcase lighting using LED strip lights

 Display Lighting

 

Render Series LED Strip light with CRI 98 for perfect color rendering

 Vivid, True Colors

 

commercial grade LED strip lights

 Store Lighting

 

Specifications:

  • ✔ 6.6 Watts/ft

  • ✔ 50,000-hour lifespan (8 hours/day for 17 years)

  • ✔ High CRI up to 98

  • ✔ High TLCI up to 99

  • ✔ High R9 valuest up to 94 and R13 values up to 96

  • ✔ Available in 12V and 24V

  • ✔ Max run in series: 9'10" (12V); 19'8" (24V)

  • ✔ LED type: SMD 2835

  •  Efficacy up to 129 lm/W

  • ✔ 12V can be cut every 1 1/4" (32 mm)

  • ✔ 24V can be cut every 2 1/2" (64 mm)

  •  Short LED pitch 5/16" (8 mm)

  •  36 LEDs/ft (120 LEDs/m)

  •  Single-bin selection (3-step MacAdam)

  •  3M VHB 4930 adhesive

  •  120° beam angle

  •  Width: 3/8" (10 mm)

  •  Height: 1/16" (2 mm)

  •  Double-layer 4oz pure copper PCB

  •  Operating temperature: -4ºF-104ºF (-20ºC-40ºC)

  •  UL Listed (cULus) E362522

Product SKU Color CCT Lumen / Foot
(Meter)
Luminous Efficacy
(Lumen / Watt)
CRI TLCI Gamut Score
Rg
Relative Fidelity Score
Rf
UB-RS-30K97C 3000K 735 lm/ft (2411 lm/m) 110 97 99 100 94
UB-RS-35K97C 3500K 833 lm/ft (2731 lm/m) 125 98 99 100 93
UB-RS-40K95C 4000K 811 lm/ft (2659 lm/m) 128 98 99 100 93
UB-RS-52K95C 5000K 870 lm/ft (2852 lm/m) 129 98 99 100 94

Certifications:
Certified UL listed LED strip lightcertified-ce-led-strip-lightcertified rohs LED strip lights

 

UltraBright™ Render Series LED strip light FAQ:

Q: Should I purchase the 12V or the 24V version?

There are a few differences among these different voltages 

Choose the 12V version to take advantage of shorter cut marks at every 1¼” to accommodate specific cut lengths. 12V options also work well with portable power systems and batteries if your project is smaller. Choose the 24V version if your project calls for longer distances over 10ft, if you want less voltage drop, or a more compact power unit.

Q: Which power supply do I need for my (x) feet of LEDs? 

The length of LED strip lights of your project will determine the size of the power supply you need. View our Power Supply chart to find the exact LED power supply you need.

Q:What is CRI and TLCI and why should I care?

Color rendering index (CRI) measures how colors are correctly rendered under a light source in comparison to natural sunlight. The index is measured on a 0-100 scale with 100 being a perfect rating of color accuracy, meaning the colors appear as they naturally would under unadulterated daylight. The bottom line: the higher the CRI, the higher quality is the light source.

95 - 100 → Phenomenal color rendering. Colors appear as they should, subtle tones pop out and are accented. All skin tones look beautiful and art comes alive as backsplashes and paint show their beautiful, full saturation.

90 - 95 →  Great color rendering! Colors pop out, look vibrant and are easily distinguishable. Noticeably great lighting starts at a CRI of 90.

80 - 90 →  Good color rendering. Though most colors will render well, you may not see items as fully saturated as you would like, but most people will not notice.

60 - 75 →  Poor color rendering. Items and colors look desaturated, dull, toneless, and at times unidentifiable (cannot see the difference between black and navy-colored socks).

Television lighting consistency index (TLCI), a newer method to measure color performance and accuracy, uses software to compare colors to a standardized sample on a 0-100 scale.

85 - 100 →  Errors are so miniscule that corrections would not be necessary.

75 - 85 →  Room for improvement. An acceptable result is easily achievable.

50 - 75 →  A colorist would want to correct the errors for an acceptable result, but it would take a long time to get there.

25 - 50 →  Poor color rendering needing much improvement from a good colorist, but the result would not meet broadcast standards.

0 - 25 →   Very bad color rendering needing drastic improvements from a good colorist, but the result would not be acceptable.

Q: What is the product warranty?

Because of our unyielding confidence in the quality of our product, we offer a 7-year warranty on our UltraBright™ Render Series LED strip lights. For more info, please read our warranty policy.

Q: What is color temperature (CCT)?

The color of light can be quantified by referring to its color temperature. White light is measured in Kelvins (K). Most white lights fall in a spectrum between 1800K and 6200K. When dropping below 3000K, the light becomes noticeably warmer. On the other end of the spectrum, the lights become cooler and emit a blue-ish tint as they rise above 6500K.

It is important that you choose a color temperature that compliments the style, mood, or intention of your space. We recommend using warmer tones for accent or ambient lighting while using cooler tones in high-traffic, industrial or task-specific areas. Speak to one of our lighting experts if you need guidance.

LED White lighting color temperatures CCT chart

Q:What is the lifespan of your strip lights?

Our lights have been rigorously tested and have an expected lifespan of 50,000 hours before dropping to 70% luminosity. This means that if you were to use your lights 12 hours a day, every day, the lights would be expected to last longer than 10 years. Even after that time has elapsed, the lights will maintain a brightness of 70%. Higher-output strips require a heat sink to reach the expected lifespan and beyond.

Q: What are lumens (lm)?

This is a quantifiable amount of light produced by an LED strip or other light-producing product, as seen by the human eye. In other words, this is one way we can measure how much light is produced. When comparing LED strip lights, you want to compare the lumen output as well as the CRI, watts/foot, warranty, and bin selection.

Q: Is there an outdoor option?

No, we do not have an outdoor version of the UltraBright™ Render Series. However, we have many other high-quality outdoor IP65-rated LED strip lights you can choose from.

Q: What is the maximum run length of the UltraBright™ Render Series lights before voltage drop?

We have engineered this strip for a long run length. The maximum continuous line of lighting in series is 9ft 10in for 12V and 19ft and 8in for 24V. Longer connections are possible in parallel with the correct power unit.

Q. What do I need to turn on my lights?

As these lights operate on low voltage, you first need to purchase a 12V, 24V power supply depending on your setup. The type of power supply may vary, depending on if you want to be able to control or dim your lights with a dimming system. We recommend using our solderless grip connectors to make connections after cutting the strip to length if needed. If you are familiar with soldering, you can go ahead and do so to make more permanent connections, but please test your expertise on a small segment of strip before committing to solder your entire project.

Q: How do I mount the lights?

The 3M double sided adhesive that is found on the back of the LED strip allows you to install them in most locations. Be sure to thoroughly clean the surface to remove all dust and particulate matter before mounting the strip. Certain surfaces may require you to take additional measures to secure the strips lights into place. Feel free to call us with any questions.

Q: Can I cut the strips myself?

Yes, our LED strip lights are made to be cut to your desired length. Using sharp scissors, you can cut this strip every 1¼” for the 12V and 2½” for the 24V. You’ll see the cut marks printed on the surface of the strip.

Q: What is a 2835 SMD LED chip?

Made with newer technology, 2835 SMD (Surface Mounted Diode) chips are more efficient and can be much brighter than other SMD chips. The number 2835 refers to the size of the chips, which measures at 2.8mm x 3.5mm. This compact size makes for exceptional discreet lighting. Click here for more information on LED chip sizes.

Q: What is the importance of UL Listed?

The Underwriters Laboratories (UL) are an independent, not-for-profit organization that focuses on evaluating products for safety certification. This means you can use and install these LEDs in commercial spaces, industrial applications and in your home knowing that these are safe products..

Q: What is Title 24 JA8?

Title 24 JA8 is the California Building Standards Code that sets the new standard for energy efficient lighting for residential and commercial buildings. Its purpose is to ensure the state has a healthy, safe and reliable source of energy by reducing energy costs and environmental impacts of energy use. Color temperatures 4000K and below can be used to comply with California Title 24 JA8.

More Information on LED Strip Lights:

Top 4 "need to know facts" about LED strip lights before purchasing With a wide range of quality and price points in the market, it is important to educate yourself before buying.

90% of our customers found this page useful in selecting their LED strips

LED Strip Lighting Examples The versatility of LED strips can be seen in the variety of projects our clients have completed. Looking for ideas? LED lighting example projects

Need assistance with your project or purchase? Our design specialists are ready to help.
Contact Us

Downloads:

 Installation Guide

General LED Strip Light Installation Guide

Data Sheet

UltraBright Render Series LED Strip Spec Sheet

Solderless Connector Guide

Grip Connector Installation Guide

IES / LDT Files

3000K IES / LDT | 3500K IES / LDT | 4000K IES / LDT | 5200K IES / LDT

Photometric Reports

3000K  | 3500K | 4000K | 5200K 

Goniophotometer Reports

3000K  | 3500K | 4000K | 5200K 

 

Related Products

Enter Your Email for an Instant 10% OFF Your First Order