Categories

Site Information

behars Loading... Please wait...

Categories

  • ColorBright RGB 150 Color changing LED strip lights ip65
  • ColorBright RGB 150 Color changing LED strip lights ip65
  • ColorBright RGB 150 Color changing LED strip lights ip65
  • ip65 ColorBright RGB 150 Color changing LED strip lights
  • ColorBright RGB 150 Color changing LED strip lights
  • Image 6

Outdoor (IP65) ColorBright™ RGB 150 Color Changing LED Strip Light

Brand Name:
ColorBright
Shipping:
Calculated at checkout
Quantity:

Product Description

Outdoor IP65 ColorBright™ "RGB 150" Color Changing LED Strip Lights

RGB strip light back yard installation poolside

Introduction:

The Outdoor ColorBright™ Color Changing 150 LED strip light is a reel of linear color changing LED chips mounted on a flexible strip of printed circuit board (PCB) with a strong adhesive backing. To achieve weather protection, the strips are enveloped in a silicone plastic casing. Sometimes referred to as "color changing LED tape lights," the flexible design of LED strips means the lights can be installed in basically any space you can imagine. With these strips you can change the lights to nearly any color combination for a wide range of creative options. These lights work perfectly for outdoor installations as well as indoor spaces such as aquariums or in bathrooms that may be exposed to water.

The IP65 rating means that the LED strip lights are able to withstand jets and splashes of water from all sides. It cannot be submerged in water, but it will withstand the elements. We also recommend outdoor lights for use indoors in high splash areas or if you're looking for a strip that is easier to clean.

  

If you order an RGB flexible strip light, you will need an RGB controller

outdoor led strip accessorie

Product features  

The top attributes of the Outdoor ColorBright™ Color Changing 150 LED strip lights are:

- These strips are 100% controllable, and can be set for dimming, color changing, flashing, etc.
- They're UL Listed, which means they have been independently verified as safe for use within home and business
- They're highly energy efficient, using just 2.2 watts per foot

  • 5-year Warranty
  • 12V or 24V input available
  • cULus Listed
  • Fully dimmable and color controllable
  • 120° Beam Angle
  • Short LED pitch pitch of 1 1/4" (33mm)
  • Highest Brightness RGB LED Chips
  • 3M 9731 adhesive for a strong bond to the weatherproof silicone sleeve
  • Single BIN LED selection to ensure color consistency
  • Highest quality components premium packaged 5050 SMD LEDs
  • IP65 Rated with non-yellowing and UV resistant silicone sleeve

Should you select 12 Volt (12v) or 24 Volt (24v)?

Depends on your application. The main difference between the two is the fact that the 24v strips can be ran for longer distances than the 12v strips can due to Voltage Drop. Voltage drop is the gradual decrease in voltage along a circuit. If your project requires a very long run of LEDs, we would recommend the 24v strips. However, there are also many projects that 12v is required (automotive or marine applications). Please feel free to live chat with us, email us, or call us with questions. 

Before noticing any unwanted color variations or dimming at the end of your run of lights, it is recommended that you run no more than 32' in series when using 12v or 48' in series when using 24v.

Application & Use:

  • Color Controllable Cove lighting
  • Signage
  • Backlighting
  • Edge lighting
  • Under cars and motorcycles
  • Store display lighting
  • Hotel lobbies 
  • Architectural displays
  • Patio and barbecue areas
  • Backyard arbors and gazebos
  • Under cabinet lighting
  • Outside in signs and under rooftops
  • Fence lighting
  • Above Fish tanks
  • High splash areas

Related products 

RGB Remote Control (needed to operate RGB strip lights) 

RGB Touch Series Remote | Multi Zone RGB Remote  | Mini XR RGB Remote | RGB Wireless Wall Dimmer | RGB Tiny Controller  

Connectors 

RGB-C1 | RGB-C2 | RGB-C3 

SPECIFICATIONS

  • 5-year Warranty
  • cULus Listed
  • 1/2" (12mm) strip width
  • Fully dimmable and color controllable
  • 120° Beam Angle
  • 12V or 24V DC Input
  • 9 LEDs/Foot (30/Meter)
  • LED pitch of 1 1/4" (33mm)
  • Highest Brightness RGB LED Chips
  • 3M 9731 adhesive for a strong bond to the weatherproof silicone sleeve
  • Thick double layer 2oz copper PCB for excellent thermal management
  • Single BIN LED selection to ensure color consistency (3-Step MacAdam)
  • Highest quality premium packaged 5050 SMD LEDs
  • Environmental Temperature -4°F to +104°F (-20°C to 40°C)
  • IP65 Rated with non-yellowing and UV resistant silicone sleeve
Product no. SKU LED Chips per foot (Meter) Voltage Input Watts / Foot (Meter) Watts / Foot (Meter) Segment Lengths Max Run Length in Series
IP65-CB-RGB-12V 9 LEDs/Foot (30/Meter) 12V DC 2.2 W/ft /(7.2 W/m) Variable 4" (100mm) 32' 10" (10 meters)
IP65-CB-RGB-24V 9 LEDs/Foot (30/Meter) 24V DC 2.2 W/ft /(7.2 W/m) Variable 6 1/2" (165mm) 48' (15 meters)

FAQ 

Frequently Asked Questions:

Q: What are the top 4 comparing factors to look for before purchasing LED strip lights? 

1. Make sure you know the requirements for your project, then when looking at options, compare lumen output, CCT, and CRI.
2. Compare LED strip size and number of chips on the reel.
3. Understand the wattage and voltage that the LED strip light uses.
4. Make sure that the products have verifiable quality.
To read more details on these top considerations, click here.
 

Q :What is the importance of UL Listed lighting?

UL is an acronym for the Underwriters Laboratories. They are an independent product safety certification organization. A good summary used by UL is, "a not-for-profit organization dedicated to public safety." This means you can install these LEDs in commercial spaces, industrial applications, and in your home with peace of mind.

Q: How do I install RGB color changing LED strip lights? 

Learn the basics of installing RGB LED strip lighting under counters, connecting them to the controller, mounting and controlling them, here. Consult our design team for extra assistance.

Q: Do you sell your outdoor rated lights by the foot?

No, we do not. We stock out IP65 outdoor rated lights in 8’ or 16’ lengths. For certain projects, we may be able to produce special lengths for you. Please let us know your requirements. IP68 waterproof strips are available in 16’ lengths that may be special ordered and subject to a one month manufacturing lead time.

Q: What are the recommendations on adhering outdoor-rated strip lights?

All of our outdoor-rated lights come with mounting brackets. The strip also has a 3M adhesive on the back. We recommend using both for the most secure installation. They can also be installed within a mounting channel.

Q: What does IP mean? What is the difference between IP65 and IP68?

This is a rating system that defines the ability of a product to be able to work in different environments. IP is an acronym "Ingress Protection". It is a measurement of the protection an item will have against solid objects (dust, sand, dirt, etc.) and liquids.

An IP rating is comprised of 2 numbers. The first number refers to the protection against solid objects (dust, etc) and the second number refers to protection against liquids. Here is a complete article about IP ratings.

Q: Can I cut reels that are outdoor rated IP65?

Yes. Be sure to reseal the strip light each time it’s cut to prevent water damage. 

Q: How flexible are these outdoor strips?

The IP65 is flexible like a measuring tape. Because we use a soft silicone sleeve to make the strip water resistant, it is still very flexible.

Q: How do I install more than one RGB LED strip light to a controller? 

You can use one controller to control multiple runs of the RGB strip lights. This can be achieved by stripping the ends of the wires from multiple runs and connecting them together before inserting them into the RGB controller. Two important things to note here. Make sure you are not exceeding the amperage / wattage maximum of the controller when you are installing multiple runs. Also, if you are using solderless connectors, make sure that the markings on the strip are used as the guides for polarity and not just the colors of the wire. The colors associated with the polarity markings will change depending on the side of the strip the connector is attached to. Click here for a detailed installation guide. Consult our design team for extra assistance.

Q: Which Power Supply do I need for my (x) feet of LEDs?

The length of LED strip lights of your project will determine the size of the power supply you need. View our Power Supply chart to find the exact LED power supply you need.
- If you order a 12v LED strip, you will need a 12v power supply
- If you order a 24v LED strip, you will need a 24v power supply 

Q: What is a 5050 SMD LED chip?

5050 SMD (Surface Mounted Diode) represents the size of the LED chips on the strip. A 5050 SMD chip measures at 5.0mm x 5.0mm. Click here for more information on LED chip sizes. 

Q: Can RGB chips be controlled independently?

These RGB strips cannot be controlled independently. You need to use individually-addressable LED chips which are normally found on digital strips. Please contact the design team for more assistance.

Q: Can I hard wire RGB strips into a wall dimmer?

The RGB strips are not compatible with conventional wall dimmers that are designed to be hard wired. We do sell a wireless wall dimmer for RGB lights that is easy to install and quite beautiful. Please contact the design team for design solutions.

Q: Can I cut the strips myself?

Yes, LED strips are made to be cut to your desired length. Using sharp scissors, you can cut the strip every few inches. 

Q: What is the maximum run length of RGB 150 strip lights?

This is entirely dependent on the strip’s voltage. For 12v systems then you can run the lights up to 32' 10" (10 meters). For 24v systems, the run length increases to 48' (15 meters). Please contact our design team for help with larger projects.

Q: I am using RGB lighting and want to control them via a DMX controller – are your lights fully controllable?

Yes. Our lights work perfectly well with DMX systems. However, our strips are not individually-addressable. For example, if one chip displays red then all of the other chips will also show red. If you require chasing or independent-control then you will need to use a digital strip.

Q: What is the difference between RGB 150 and RGB 300?

The 150 or 300 directly correspond to the number of LED chips per reel. Twice the amount of light is emitted and double the amount of power is also required.

Q: Which power source do you need for my project?

LED Strip Light Power Usage Calculator 

DOWNLOADS

Data Sheet Download

IP65 Outdoor ColorBright RGB 150 LED Strip Lights

Connection Guide 

RGB Solderless Connector Installation Sheet 

IES and LDT Files

IES / LDT

Product Reviews

Write Review

  1. Brighter then imagined, great design support!

    Posted by Cutlass Floatworks on 18th Sep 2017

    Been working with 12v "weather proof" strips and were so pleasantly surprised by the difference of the 24v strip. Thanks to your design support recommendation we found the perfect product and we're able to do more without having to drape the project with strips to get the same intensity. Clients are beyond happy with the results!

  2. Great customer service

    Posted by Chad S. on 1st Jan 2017

    I have purchased from you guys before and each time the customer service was outstanding. They helped me get the right products the first time and then had it waiting at their warehouse for my pick up. Great company to work with

  3. Awesome Product and Awesome Support!!

    Posted by Matt Pals President Pals Electric Inc. on 24th Oct 2015

    We purchased aprox. 400' of the Flex Fire LEDS, 2 remote control units, and one controller for a very unique project. David Reily helped lay everything out and put a list together for everything that we needed. He was great on the phone and did everything he said he was going to. The lights installed very easily and wow are they bright. I installed them on a 120' tall wind turbine tri leg tower. I put one run of the LED's down each tower leg. The lights can literally be seen from miles away! Probably farther if we had a clear line of site. We can dim them but why bother :)

    The only thing Flex Fire needs to work on is the instructions on how to use the remote. The remote control can be a little complicated to work with at first.

    I would definitely recommend this product to anyone looking at replacing rope lighting or just installing an LED rope or tape light.


Specifications for this Hybrid LED light kit

Product Hybrid Bright White/Warm White LED Strip Light
Color Temperature 2900K for Warm White and 6500K for Bright White
Lumen (Brightness) 3450 Lumens per reel
Quantity per unit You will receive a continuous 16ft section of lights
UL Listed? Yes UL Listed, Must be used with class 2 power transformer
Working Voltage 12v DC
Dimmability Fully Dimmable
Beam Angle 120 Degrees
Rigid or Flexible?

-Flexible installation up to 90 degrees. Used on curved surfaces

Power consumption 2.92 watts per foot
UV emission No
LED Count per reel 600 LEDs
Warranty

2 years

Back to Top