- Browse Products
- Dimmers, Amplifiers, and RGB Controllers
- LED Color Changing Remote Controls
- Touch RF Controller for Hybrid Warm White/Bright White Strip Light
Touch Bright White and Warm White Changing LED Strip Light Remote Control
Hybrid series LED strip lights enable you to choose between bright white and warm white to find your perfect shade of white.
Used to control Hybrid Bright White/Warm White LED Strip Reel (white and warm white interlaced led strip), act as a dimmer and it can separately adjust the brightness of the white and warm white in order to get a wide range of color temperature. Easily change the modes of the strip light to be bright white or warm white or any combination in between! Uses RF so there is no need for line of sight.
The hybrid LED strip light controllers will not work with the Magnetic Dimmable Power supplies. You need to choose a non-dimmable LED power supplies.
- Input voltage: DC 12 or 24V
- Output channel: two signal output (6A/channel) = total 144W(12V) or 288W (24V)
- Function: 8 modes
- Max remote distance: 20m without barrier
- Controller: RF Touch Controller--Uses (3) AAA batteries
- Radio Frequency: 433MHz
- Working Temperature: -30C to +60C
- Dimensions: 3 1/4" x 3 1/4" x 1 3/8"
Hybrid strip lights will NOT work with our Zurik Dimmable LED Power Supplies, you need a non-dimmable driver.
Posted by Jimmy on 15th Sep 2016
After purchasing two faulty hybrid white controllers from another website, I was pleased to discover that this unit works as expected.
Touch response and range on the remote is great. Additionally, the receiver drives the LEDs at their rated max brightness. I purchased the same controller (supposedly) from another website and the power On/Off buttons were flipped. That controller came in a different box and it was delivering only ~60% of the max current (measured by a multimeter) the LEDs are rated for, even when at full brightness setting.
Glad to see that this product being sold here actually works as advertised.
Wireless Remote Control
Posted by Charles on 5th May 2014
Great way to control the lighting period. Will control more than one receiver. Wish there was a included wall mount for the remote.
Posted by Ron Karpola on 7th Mar 2013
Works fine. Could use more instructions especially for the novice. Figured it out and got it up and working. Suggest you try it out first and a very small LED strip (1 1/2") to make sure you are doing it right.
Specifications for this Hybrid LED light kit
|Product||Hybrid Bright White/Warm White LED Strip Light|
|Color Temperature||2900K for Warm White and 6500K for Bright White|
|Lumen (Brightness)||3450 Lumens per reel|
|Quantity per unit||You will receive a continuous 16ft section of lights|
|UL Listed?||Yes UL Listed, Must be used with class 2 power transformer|
|Working Voltage||12v DC|
|Beam Angle||120 Degrees|
|Rigid or Flexible?||
-Flexible installation up to 90 degrees. Used on curved surfaces
|Power consumption||2.92 watts per foot|
|LED Count per reel||600 LEDs|