Free Project Advice

Talk to Lighting Experts

  • Project Design Services
  • Product Selection
  • Samples and Quotes!

Outdoor (IP65) ColorBright™ RGBW Color Changing + White LED Strip Light (16FT)

$104.30 - $149.00
SKU:
IP65-CB-RGBW

outdoor ip65 rated color changing and white LED strip light

Outdoor IP65 ColorBright™️ RGBW Color Changing + White LED Strip Light

Introduction:

The Outdoor ColorBright™ (IP65)  Color Changing + White LED strip light is a reel of linear color changing LED chips mounted on a flexible printed circuit board (PCB) that has a silicone coating offering protection from water and foreign elements. These lights can create any color you can imagine, including a beautiful warm white. No longer will you have to sacrifice one product for the other, we have combined them both into one strip.

The IP65 rating means that the LED strip lights are able to withstand jets and splashes of water from all sides. It cannot be submerged in water, but it will withstand the elements. We also recommend outdoor lights for use indoors in areas that receive exposure to water or if you're looking for a strip that is easier to clean.

 

cove lighting using RGBW color changing + white LED strip lightRGB Color changing LED strip light effects 


Top Features and Benefits:

Short LED pitch LED strip lights with 18 LEDs per footlow energy consumption LED strip lightsRGB 300 Color Changing LED strip light max run lengthRGB Color changing LED strips in 12V and 24V

  • ✔ LEDs per foot: RGB 9; White :9

  • ✔ 15-year Warranty

  • ✔ 50,000 Hour Lifespan (8 hours a day for 17 years)

  • ✔ 12V or 24V input available

  • ✔ IP65 Rated non-yellowing and UV resistant silicone sleeve

  • ✔ Fully dimmable and color controllable

  •  18 LEDs/Foot(60/Meter)

  •  Short LED pitch of 3/4"(17 mm)

  • ✔ Single BIN LED selection to ensure color consistency

  •  Highest quality components packaged 5050 SMD LEDs

  •  UL Listed (cULus) E362522

  • ✔ Pair these strips with a controller and access hundreds of effects (flashing, strobing, fading, dynamic modes)

Applications and Use:

These strips are installed in a wide variety of applications including: 

  •  Linear lighting

  •  Architectural displays / sides of buildings

  •  Accent lighting locations

  •  Under cars and motorcycles

  •  Shop display lighting

  •  Back yard arbors and gazebos

  •  Under cabinet lighting

  •  Outside in signs and under rooftops

  •  Above cabinet lighting

  •  Under counter lighting

  •  Hotel lobbies

  •  Cove lighting

Available Colors:

In addition to the RGB chips on the reel, you are able to select which color you want as an option for color blending or to use when the strip is only illuminating the white LEDs. Half of the LED chips can be chosen from the following options

RGB color changing and white LED Strip light warm white color temperaturesRGBW color changing and white LED strips cool white color temperature

 

Why choose ColorBright RGBW LED Strip Light:

specification grade LED strip light with 15 year warrantyhigh brightness RGB Color Changing LED Strip lightsRGBW color changing LED strip light cut segements2 oz copper PCB led strip lights

Pair it with an RGB Controller:

rgb-color-changing-led-strip-controllers.jpg

 

 

Examples of what the ColorBright™️ RGBW Series can do for your space

  

patio deck lighting with RGBW LED strip lights

 Patio Lighting

 

bar lighting with RGB color changing LED strip lights

 Kitchen Lighting

 

restaurant lighting using RGB color changing LED strip lights

 Bathroom Lighting

 

ceiling lighting with RGB color changing strip lights

 Outdoor Lighting

 

Specifications:

  • ✔ 4.4 Watts/ft

  • ✔ 15-year warranty

  • ✔ 50,000-hour lifespan (8 hours/day for 17 years)

  • ✔ Width: 9/16" (14 mm) strip

  •  Height: 3/16" (4 mm)

  •  Can be cut every 4" for 12V and 6 1/2" for 24V

  •  Max length in series 16' 5" for 12V and 32' 10" for 24V

  • ✔ Fully dimmable and color controllable

  • ✔ 120° Beam Angle

  • ✔ 12V or 24V DC Input

  • ✔ White LEDs have a high CRI of 80+

  •  18 LEDs/Foot (60/Meter)

  • ✔ Short LED pitch of 3/4" (17 m)

  •  Thermally Resistant 3M VHB 9731

  •  Thick double layer 2oz copper PCB

  •  Single BIN LED selection to ensure color consistency

  •  Highest quality premium packaged 5050 SMD LEDs

  •  Environmental Temperature -4°F - 104°F (-20°C - 40°C)

  •  UL Listed (cULus) E362522

Product SKU Color
CCT
Watts / Foot
(Meter)
Lumens / Foot
(White only)
CRI
(White Only)
Gamut Score
(White Only)
Fidelity Score
(White Only)
IP65-CB-RGB24K 2400K 4.4 W/ft
(14.4 W/m)
153 lm/ft
(500 lm/m)
82    
IP65-CB-RGB27K 2700K 4.4 W/ft
(14.4 W/m)
159 lm/ft
(520 lm/m)
82    
IP65-CB-RGB30K 3000K 4.4 W/ft
(14.4 W/m)
198 lm/ft
(423 lm/m)
83 91.4 82.9
IP65-CB-RGB42K 4200K 4.4 W/ft
(14.4 W/m)
207 lm/ft
(679 lm/m)
82 96.9 80.6
IP65-CB-RGB62K 6200K 4.4 W/ft
(14.4 W/m)
213 lm/ft
(698 lm/m)
83 94.3 79.5

Certifications:
Certified UL listed LED strip lightcertified-ce-led-strip-lightcertified-rohs-led-strip-light

Outdoor ColorBright™ RGBW Color Changing LED strip light FAQ

 

Q: What is the product warranty?

We’re so happy with the quality of our product, we offer a 15-year warranty on most of our LED strips to all of our clients. The warranty on power supplies ranges from 2 to 7 years which is model dependent.

Q: What is the lifespan of your strip lights?

Our lights have been rigorously tested and have an expected lifespan of 50,000 hours before dropping to 70% luminosity. This means that if you were to use your lights 12 hours a day, every day, the lights would be expected to last longer than 10 years. Even after that time has elapsed, the lights will maintain a brightness of 70%. Higher-output strips require a heat sink to reach the expected lifespan and beyond.

Q: What is color temperature?

The color of light can be quantified by referring to its color temperature. White light is measured in Kelvins (K). Most white lights fall in a spectrum between 1800K and 6200K. When dropping below 3000K, the light is noticeably warmer or "softer". On the other end of the spectrum, the lights have a blue-ish tint and cooler tone when passing 6500K.

Q: What are lumens (lm)?

This is a quantifiable amount of light produced by an LED strip or other light-producing product. This is one way we can measure light output.

Q: What is the lumen output of the ColorBright RGB+W when set to white?

The lumen output for ColorBright RGB+W (30K, 42K, 62K) is as follows:
CB-RGB30K: 650LM/M
CB-RGB62K: 700LM/M
CB-RGB42K: 680LM/

Q: Do you sell your outdoor rated lights by the foot?

No, we do not. We stock out IP65 outdoor rated lights in 8’ or 16’ lengths. For certain projects, we may be able to produce special lengths for you. Please let us know your requirements. IP68 waterproof strips are available in 16’ lengths that may be special ordered and subject to a one month manufacturing lead time.

Q: What are the recommendations on adhering outdoor-rated strip lights?

All of our outdoor-rated lights come with mounting brackets. The strip also has a 3M adhesive on the back. We recommend using both for the most secure installation. They can also be installed within a mounting channel.

Q: What does IP mean? What is the difference between IP65 and IP68?

This is a rating system that defines the ability of a product to be able to work in different environments. IP is an acronym "Ingress Protection". It is a measurement of the protection an item will have against solid objects (dust, sand, dirt, etc.) and liquids.
An IP rating is comprised of 2 numbers. The first number refers to the protection against solid objects (dust, etc) and the second number refers to protection against liquids. Here is a complete article about IP ratings.

Q: Can I cut reels that are outdoor rated IP65?

Yes. Be sure to reseal the strip light each time it’s cut to prevent water damage. A lot of clients like to use a liquid electrical tape.

Q: How flexible are these outdoor strips?

The IP65 is flexible like a measuring tape. Because we use a soft silicone sleeve to make the strip water resistant, it is still very flexible.

Q: How do I install RGBW color changing LED strip lights ?

RGBW strip lights need to use a RGBW controller for them to work. Once you have selected the length of lights you want, you will have to select a power supply by calculating the wattage the length of strip will be using. When selecting a remote, make sure that you are not going beyond the wattage maximum for that particular controller. For longer run lengths, you are going to want to use an amplifier, or another controller. The strips have 5 wires that need to go into their appropriate places within the RGBW controller. May attention to the indicator markings on the strip. Learn the basics of installing RGB LED strip lighting under counters, connecting them to the controller, mounting and controlling them, here. Consult our design team for extra assistance.

Q: What is the maximum run length of RGBW strip lights?

This is entirely dependent on the strip’s voltage. For 12V systems then you can run the lights up to 16’ 5” (1 reel). For 24V systems, the run length doubles to 32’ 10” (2 reels). Please contact our design team for help with larger projects.

Q: Which power source do you need for my project?

LED Strip Light Power Usage Calculator

More Information on LED Strip Lights:

Top 4 "need to know facts" about LED strip lights before purchasing With a wide range of quality and price points in the market, it is important to educate yourself before buying.

90% of our customers found this page useful in selecting their LED strips

LED Strip Lighting Examples The versatility of LED strips can be seen in the variety of projects our clients have completed. Looking for ideas? LED lighting example projects

Need assistance with your project or purchase? Our design specialists are ready to help.
Contact Us

Related Products

Enter Your Email for an Instant Coupon and Design Guide for Your Project