Free Project Advice

Talk to Lighting Experts

  • Project Design Services
  • Product Selection
  • Samples and Quotes!

Dynamic Tunable White DMX Lite™ Controller

  • Mini driver for DMX controllers

  Dynamic Tunable White DMX Lite Controller

Dynamic Tunable White DMX Lite™ Controller

If you are in need of a basic DMX controller for Dynamic Tunable White that can control many, many fixtures all at once, then this is the controller for you!

The Dynamic Tunable White DMX Lite™ Controller is a stylish, wall mounted controller that can control a single zone of DMX products. Works with Dynamic Tunable White LED strip lights. Please Note: This controller runs off of 12-24V DC power, so a small dedicated power supply is required for it in addition to any drivers that you may be using to power your strip lights.

Please Note: This controller runs off of 12-24V DC power, so a small dedicated power supply is required for it in addition to any drivers that you may be using to power your strip lights.


DMX controller for Tunable White FixturesDMX512 Tunable White Controllerone zone of control DMX DecoderDMX controller fits in standard gang box

  • DMX512 Controller
  • Stylish glass interface
  • DC input and DMX output screw terminals
  • Fits in a standard US single gang box
  • Mounting plate and screws included
  • Short circuit protection
  • Single zone of control
  • Works with 2 channel, Tunable White fixtures


  • Installations with fixtures requiring basic DMX512 control
  • Installations with a large amount of fixtures that would be too many for a single AC or RF control system to handle

Compatible Products


Dynamic Tunable White DMX Lite Controller
Input Voltage 12-24V DC
Output Signal DMX512
Warranty 5 years
Weight 0.5 lbs (0.22 kg)
Size L: 4.72"(120 mm) x W: 2.95” (75 mm) x H: 1.15” (30 mm)
DMX Control System Type DMX512
Ambient Temperature 32°F to 104°F (0°C to 40°C)
Certificates CE, RoHS, FCC
IP Rating IP20
Power Consumption < 20 mA


Frequently Asked Questions

Q: Why use DMX?

If you have very specific control requirements, a large amount of fixtures to control all at once, or set-ups that require multiple zones or areas, then DMX is a good fit for your project. DMX can control many different pieces of DMX equipment such as lighting equipment, smoke machines, projectors, dimmers, etc. from a central location. In addition, fewer cables are used saving setup time and cost.

Q: How do you control DMX?

First you need to determine how many lighting zones or areas you wish to control independently. Each one of those zones or areas needs its own DMX address, so a DMX decoder can send a signal to control it.

A single DMX universe can control up to 512 channels. Some controllers have only a single DMX universe while others have multiple. Single-color LEDs require a single channel to send instructions to dim or brighten your light, or to switch it on and off, but Dynamic Tunable White, RGB and RGB+W each have different channel requirements to control the brightness of each adjustable color. For example, an RGB LED strip will use three of the 512 channels within a single DMX universe, one for red, one for green and one for blue.

Q: Is this controller compatible with any LED strip light?

This unit is designed to be compatible with any constant voltage Dynamic Tunable White fixture. If you are using a fixture that has a built-in DMX addressing function (like a DMX wall washer or flood light) you can hook it directly into the controller, but if you are using a product such as a strip light or light bar, you will need to add a DMX decoder between the light and the controller.

Q: Can I install the controller outdoors?

These products are not outdoor rated. Keep them indoors, and avoid exposure to moisture or direct sunlight.

Q: When would I use this controller as opposed to using a programmable DMX controller?

The DMX Lite™ Controllers are perfect to use on installations where you have a lot of lights that all need to do the same thing at the same time. For example: If you have 30 DMX controlled lights on the perimeter of a building and you just want to be able to use a color wheel and make them all a certain color at any given time, this is a great controller. But if you need a DMX controller that can have each of the 30 lights changing a different specific color at a specific time, then you would need to upgrade to a controller that allows for programmable scenes.

Need assistance with your project or purchase? Our design specialists are ready to help. Contact Us!



User Guide / Data Sheet

Dynamic Tunable White DMX Lite Spec Sheet

Related Products

Enter Your Email for an Instant Coupon and Design Guide for Your Project