Phoenix™ Mounting Channel Kit - Recessed Installation
Flexfire Channel Kits are designed with you in mind to ensure that your strip light lives a long, healthy life. By acting as a heat sink and providing a barrier from dust and debris, aluminum channels can extend the life of your strip light while also making maintenance simple. The channels are sold in one meter pieces and can be mounted on practically any flat surface to give your project the finished look it deserves.
The Phoenix is perfect for mud-in applications where lights are to be recessed into the wall with no parts of the channel visible.This channel is made from aluminum and creates a beam angle of 110 degrees. It is compatible with all of our strips and all of our strip connectors making it one of our most versatile channels yet, even fitting up to two pieces of strip light depending on the desired appearance!
Available in two different diffusion levels (Frosted, and Matte), this channel allows users to maintain a low profile while providing protection to your lights. Covers are made of polycarbonate and are UV resistant. End caps and connectors are included with this product for ease of installation and additional ones can also be purchased separately.
Why Use Aluminum Mounting Channels?
What Comes with The Kit?
This Channel Kit Includes:
- (1) Phoenix™ Aluminum Channel, 1 meter long (3.28')
- (2) Phoenix™ Open End Caps
- (2) Phoenix™ Closed End Caps
- (2) Phoenix™ Straight Connectors
- (2) Phoenix™ Phoenix Inside 90 Degree Connectors
- (2) Phoenix™ Phoenix Outside 90 Degree Connectors
Covers (Select one):
- Phoenix™ Frosted Cover, 1 meter long (3.28')
- Phoenix™ Matte Cover, 1 meter long (3.28')
|Color||Anodized Aluminum Finish|
|Channel Style||Mud-in Mount|
|Beam Angle||110 Degrees|
|Mounting Clip Material||Stainless Steel|
|End Cap Material||PVC|
|Mounting Options||See Diagrams|
|Dimensions||L: 3' 3/8" (1 m), W: 3 3/8" (88 mm), H: 3/4" (21 mm)|
|Enviromental||Suitable for dry/damp location use|
|Lens Transmission Level||Frosted 65% and Matte: 27%|
Mud-in Installation Instructions
Determine tape light and channel length.
Cut channel and cover to the desired length.
Clean channel and adhere tape light
Cut channel mount area.
Using screws, fasten the channel to the surface.
Cover the channel lens with painters tape and the wings of the channel with drywall mud.
Let the mud dry and then remove the painters tape.
Note: To ensure that your strip lights meet electrical requirements, use the proper in-wall or plenum-rated wire in conjunction with our Grip Solderless Connectors.
Frequently Asked Questions
Q. What’s the warranty on this channel?
We offer a six-year warranty on all our channels (this does not apply to KLUS channels).
Q. Will I see spots if I use a cover with this channel?
It depends on what LED strip light you're using. Brightness and a large amount of chips per foot are the two main factors that contribute to a seamless line of light. You can get more information by taking a look at our Diffusion Chart, but in most cases, the Matte Cover eliminates dark spots and creates a continuous line of light.
Q. If connectors do not fit inside the channel, what options do I have?
You can solder the leads on the LED strip light.
Q. What kind of wire should I use for my strip light with this channel?
Since this channel is meant for in-wall installations we recommend using in-wall rated wire. One style of wire that will work for in-wall, riser, and plenum spaces would be our CMP wire which can easily be connected to our C1 Grip Solderless connectors.
Need assistance with your project or purchase? Our design specialists are ready to help. Contact Us!
Aluminum Mounting Channels Spec Sheet
Compatibility Chart for Connectors
Aluminum Mounting Channels and Connectors Compatibility Chart
Compatibility Chart for Indoor IP20 Strips
Aluminum Mounting Channels and Indoor IP20 Strips Compatibility Chart
Compatibility Chart for Outdoor IP65 Strips
Aluminum Mounting Channels and Outdoor IP65 Strips Compatibility Chart