Get Free Advice

Talk to Lighting Experts

  • Project Design Services
  • Product Selection Help
  • and More!

Cassini™ Mounting Channel Kit - Recessed Installation

$7.00 - $25.00

Cassini Mounting Channel Kit for Recessed Installation

CASSINI™ MOUNTING CHANNEL KIT - RECESSED INSTALLATION

Introduction

Flexfire Channel Kits are designed with you in mind to ensure that your strip light lives a long, healthy life. By acting as a heat sink and providing a barrier from dust and debris, aluminum channels can extend the life of your strip light while also making maintenance simple. The channels are sold in one meter pieces and can be mounted on practically any flat surface to give your project the finished look it deserves.

The Cassini™ was designed for recessing our LED strip lights into woodworking, cabinetry, and other installations. This channel is also great for heat dissipation, lengthening the life of the LED strip light, while also providing diffusion to the lights.

The Cassini™ is a shallow channel made from aluminum and creates a beam angle of 80 degrees. It is intended to be used with strips that draw up to 4.4 w/f (please see compatibility charts for more information).

Covers are available in three different diffusion levels (Clear, Frosted, and Matte), and are made of polycarbonate and are UV resistant. End caps and mounting clips are included with this product for ease of installation and additional ones can also be purchased separately.

What comes with the Kit?

This Channel Kit Includes:

Aluminum Channels: 

  • (1) Cassini™ Aluminum Channel, 1 meter long (3' 3/8")

Accessory Kit: 

  • (2) Cassini™ Open End Caps
  • (2) Cassini™ Closed End Caps
  • (4) Cassini™ Mounting Clips

Covers (Select one):

  • Cassini™ Clear Cover, 1 meter long (3' 3/8")
  • Cassini™ Frosted Cover, 1 meter long (3' 3/8")
  • Cassini™ Matte Cover, 1 meter long (3/8")

Service:

Channel Material Aluminum
Color Anodized Aluminum Finish
Channel Style Recessed
Beam Angle  80 Degrees
Mounting Clip Material Stainless Steel
End Cap Material PVC
Lens Material Polycarbonate
Field Cuttable Yes
See Diagrams
L: 3 3/8" (1 m), W: 7/8" (20.4 mm), H: 1/2" (12.5 mm)
6 Years
Suitable for dry/damp location use
Clear: 92% - Frosted: 59% - Matte: 28%

Installation Instructions for Recessed Mounting Channels

Frequently Asked Questions

What’s the warranty on this channel?

We offer a six-year warranty on all our channels (this does not apply to KLUS channels).

Will I see spots if I use a cover with this channel?

It depends on what LED strip light you're using. Brightness and a large amount of chips per foot are the two main factors that contribute to a seamless line of light. You can get more information by taking a look at our Diffusion Chart, but in most cases, the Matte Cover eliminates dark spots and creates a continuous line of light.

What if I only need to purchase extra accessories for my channel?

Accessories are available for each channel as standalone items for purchase under the dropdown of each channel's product page.

If the LED strip light solderless connectors fo not fit inside the channel, what options do I have?

You can solder the leads on the LED strip light.

Can I put your high output strips, like the Ultrabright Industrial Series, and the Ultrabright Render Series, inside this channel?

You cannot use the Render and the Industrial Series with this channel, but most of our channels are compatible with our high-output strip. Please check the Compatibility Chart for LED Strips for more information.

How can I put the channel on a surface?

There are different options. Most of our channels come with mounting clips and screws, which is the easiest way of installing the channel on a surface. Depending on the type of channel, you can also use 3M tape, or screw the channel directly onto the surface.

Need assistance with your project or purchase? Our design specialists are ready to help. Contact Us!

Related Products

Enter Your Email for an Instant 10% OFF Your First Order