- Browse Products
- LED Power Supplies
- Zurik Magnetic Dimmable LED Drivers
- 60W 12v Zurik™ LED Dimmable Driver
60W 12v Zurik™ LED Dimmable Driver
Zurik Magnetic Transformers are the smallest and highest quality magnetic transformers on the market. This Class 2 compliant and energy efficient dimmable LED driver has the highest efficiency with no wattage derating 100% load.
Made in the USA with a 5-year warranty, these drivers will do more than power your LEDs. They will make your design dreams into realities.
Here are top attributes of the Zurik™ Magnetic Power Supply:
- ETL Listed
- CLASS 2 compliant
- Primary and Secondary Breakers
- 5-Year Warranty
Notes and Warning:
Important: We want to make sure that your LEDs dim perfectly and do not flicker. Therefore we only recommend that our drivers are to be dimmed with our Lutron dimmers. We have tested most installation situations and are 100% confident that our Lutron Dimmers will function as promised with our Zurik™ Drivers. We cannot guarantee other dimmers will work - Our Compatible Lutron Dimmers
- NOT compatible with Hybrid or RGB series Strip Lights
- Make sure these are installed by a professional or licensed electrician
- This LED Dimmable DC Driver is to be used with magnetic low voltage AC dimmer switches
- PAY ATTENTION to dimmer's minimum load requirements
- Zurik drivers are to be installed in accordance with Article 450 of the National Electric Code (NEC).
- Needs to be installed in a well-ventilated area and requires the free flow of air.
Need assistance with your project or purchase?
Our design specialists are ready to help. Contact Us
|Regulations|| ETL Listed
|Dimensions||H 8 ⅛" x W 4" x D 1 ⅝"|
|Warranty||5-Year Limited Manufacturer's|
|Wattage|| 60 Watts (5 amps)
|Features||Energy efficient, high efficiency, Class 2 compliant|
|Dimmability||Magnetic Dimmer - dimmer's minimum load must be maintained|
|Output Voltage||12v DC|
|Input Voltage||120v AC|
1. What wall dimmer can I use with this? Our Compatible Lutron Dimmers
Lutron and Leviton magnetic wall dimmers are not only stylish, but the preferred dimmers for LED magnetic dimmable transformers.
2. Are these power units compatible with your RGB or Hybrid Series LED strip lights?
No, they are not compatible with the RGB or Hybrid Series. You will need our LED Power Supplies that are not dimmable.
3.How do I install the transformer?
Below is an install of a Magnitude LED Driver (similar driver).
Works, but hard to work with
Posted by jeff h. on 5th Jun 2017
Works fine with the lights, but very little room to make a connection in them
60W 12v Zurik™ LED Dimmable Driver
Posted by Paul R. on 4th Jun 2017
I have used several of these with the ultrabright design series LED strip lights under and over my cabinets in several rooms. There is no hum and it works great with a low voltage dimmer.
60W 12v Zurik™ LED Dimmable Drive
Posted by Paul R. on 2nd Jun 2017
I have used 150W, 100W, 60W, and 40W Zurik dimmable drivers for under and over cabinet lighting in several rooms. All drivers are very quiet and easy to install. The 40W will flicker on the lowest setting of the dimmer. Maybe under minimum wattage for the dimmer.
LED Under Cabinet Kitchen Lighting
Posted by James B. on 31st May 2017
Another LED kitchen project done again. We used the 60W Zurik dimming Driver to dim the lights for a nice ambiance at parties.
LED under cabinite lights
Posted by Anonymous on 18th Feb 2017
Great sales people, gave me sound advice! My customer was very happy with the lighting. Will use FlexFire for all my Kitchen lighting
mounting system not friendly
Posted by Unknown on 23rd Jan 2017
on occasion the drivers have to be mounted horizontally and the mounting bracket is not friendly for this type of mounting as the driver wants to slide off the bracket. also, the 20 and 60 watt versions don't offer the ability to bring wires into the back of the driver which makes for a lack of mounting options. drivers themselves seem to be good, i haven't had any failures, just don't like the poor mounting designs.
Posted by James Brown on 28th Oct 2016
We use the Zurik LED dimmers for all our kitchen remodels. Once our customers see the LED's lite and how they dim down they are thankful we talked them into installing LED's from Flexfire
Easy to work with
Posted by Brian McCormack on 25th Oct 2016
Everything worked out great very easy install I use this product on a regular basis
Posted by Sylvia Correnti on 30th Sep 2016
love the system. the online help to make my initial purchase was priceless.
Great product quality and easy installation
Posted by Jeff Gates on 14th Sep 2016
I completely remodeled our kitchen and installed granite counters but felt like their true beauty wasn't shown due to all the shadows of my cabinets. Installed flex fire lights under cabinets and used the extra 5 ft of lights and bought the above mentioned transformer to replace the old light over my sink . Amazing transformation everyone else always comments on the undercabinet lighting and wants to no where I got them.. I am a flexfire buyer for life.
Posted by Gary Henning on 14th Jan 2016
Works well with strip lighting, down to almost zero light from LED's with Lutron magnetic dimmer. Should also be offered with a plug-in style cord, which would may life much easier.
Posted by Ichi-Joe on 23rd Jul 2015
ZRK-60-12VDC, 60watt Drives 16 FT. of cool white 5050 Flexible 300 LED Strip with a control dimmer, Lutron® Maestro C.L MACL-153M-WH 150W Dimmer. The techs at Lutron said it would not work, but it does and I see no adverse effects.
Quiet and Cool
Posted by Unknown on 3rd Mar 2015
Transformer drives 10 feet of Ultra Design series lights. Used in conjunction with line voltage Lutron dimmer, which allows the transformer to be unpowered when the lights are off . It is installed in an over sink cabinet and does not produce significant heat. It is totally silent at all dimmer levels and installed next to a big box store puck light transformer which has a noticeable hum.
The Product & Customer Service w
Posted by George Sweeper on 12th Feb 2015
Just a brief note to say that the Dimmable LED Driver I purchased from Flexfire was perfect for my strip LED lights. Equally, if not more important, was the customer service assistance that I received from David Reilly. With out his help I would still be dealing with the pseudo LED lighting "professionals" in the NYC area. I have already begun to recommend Flexfire to anyone interested in home or business lighting, and I'm looking forward to using their services in the future.
Simple and it WORKS
Posted by Unknown on 7th Aug 2014
Simple to install and it works. Wish it came with the cord grips, but one stop at the hardware store and no problems.
Good Dimmable Driver
Posted by Michael Harper on 16th Mar 2014
Very good product
Posted by Unknown on 19th Feb 2014
Easy to install, will definitely be purchasing from FFLEDS again!
Still made here
Posted by Ken on 10th Jan 2014
I like that they are made here in the U.S.A. It worrked great for my install, also like the 10% voltage option on this driver. Great product
Specifications for this Hybrid LED light kit
|Product||Hybrid Bright White/Warm White LED Strip Light|
|Color Temperature||2900K for Warm White and 6500K for Bright White|
|Lumen (Brightness)||3450 Lumens per reel|
|Quantity per unit||You will receive a continuous 16ft section of lights|
|UL Listed?||Yes UL Listed, Must be used with class 2 power transformer|
|Working Voltage||12v DC|
|Beam Angle||120 Degrees|
|Rigid or Flexible?||
-Flexible installation up to 90 degrees. Used on curved surfaces
|Power consumption||2.92 watts per foot|
|LED Count per reel||600 LEDs|