- Browse Products
- LED Power Supplies
- Zurik Magnetic Dimmable LED Drivers
- 50W 24v Zurik™ LED Dimmable Driver
50W 24v Zurik™ LED Dimmable Driver
Do you want to dim your LED strip lights with a Lutron© Wall Dimmer? If so, you'll need the Zurik™ Magnetic Power Supply. This power supply is Class 2 Compliant, highly energy efficient, and is great for stylish, discreet dimmable LED strip light installations. With Zurik™ you will do more than simply supply electricity to your LED strips, you will turn your design dreams into realities.
Here are top attributes of the Zurik™ Magnetic Power Supply:
- ETL Listed
- CLASS 2 compliant
- Self Auto-Reset Primary and Secondary Breakers
- 5-Year Warranty
Notes and Warning:
Important: We want to make sure that your LEDs dim perfectly and do not flicker. Therefore we only recommend that our drivers are to be dimmed with our Lutron dimmers. We have tested most installation situations and are 100% confident that our Lutron Dimmers will function as promised with our Zurik™ Drivers. We cannot guarantee other dimmers will work - Our Compatible Lutron Dimmers
- NOT compatible with Hybrid or RGB series Strip Lights
- Make sure these are installed by a professional or licensed electrician
- This LED Dimmable DC Driver is to be used with magnetic low voltage AC dimmer switches
- PAY ATTENTION to dimmer's minimum load requirements
- Zurik drivers are to be installed in accordance with Article 450 of the National Electric Code (NEC).
- Needs to be installed in a well-ventilated area and requires the free flow of air.
Need assistance with your project or purchase?
Our design specialists are ready to help. Contact Us
|Regulations|| ETL Listed
|Dimensions||L 7 ⅜ " x W 2 ⅛ " x D 1 ⅝ "|
|Warranty||5-Year Limited Manufacturer's|
|Wattage|| 50 Watts (2.08 amps)
|Features||Energy efficient, high efficiency, Class 2 compliant, Very small for a magnetic LED transformer, very quiet|
|Dimmability||Magnetic Dimmer - dimmer's minimum load must be maintained|
|Output Voltage||24v DC|
|Input Voltage||120v AC|
1. What wall dimmer can I use with this? Our Compatible Lutron Dimmers
Lutron and Leviton magnetic wall dimmers are not only stylish, but the preferred dimmers for LED magnetic dimmable transformers.
2. Are these power units compatible with your RGB or Hybrid Series LED strip lights?
No, they are not compatible with the RGB or Hybrid Series. You will need our LED Power Supplies that are not dimmable.
3.How do I install the transformer?
Watch an install of a magnetic LED Driver (similar driver to Zurik).
Posted by John on 17th Dec 2015
These drivers are kinda small making it a little difficult to get the wire nuts inside but it makes them easy to hide them on top of cabinets.
Posted by Unknown on 11th Oct 2014
I installed the driver in the attic, and ran the 24 volt lines down to the cabinets.
The metal case gave me confidence it could handle the Texas summers in the attic, and the connections were easy to make with screw connectors.
With 8 ft. of leds, this driver was exactloy what I needed and worked well.
I am going to run some low power lights in my office, and will certainly buy Zurik again.
Specifications for this Hybrid LED light kit
|Product||Hybrid Bright White/Warm White LED Strip Light|
|Color Temperature||2900K for Warm White and 6500K for Bright White|
|Lumen (Brightness)||3450 Lumens per reel|
|Quantity per unit||You will receive a continuous 16ft section of lights|
|UL Listed?||Yes UL Listed, Must be used with class 2 power transformer|
|Working Voltage||12v DC|
|Beam Angle||120 Degrees|
|Rigid or Flexible?||
-Flexible installation up to 90 degrees. Used on curved surfaces
|Power consumption||2.92 watts per foot|
|LED Count per reel||600 LEDs|