Posted by Unknown on 21st Mar 2013
This is a nice strip light that is bright and gives off some nice color. I purchased an miniXr to control them and the static colors the controller offers look very good. They are an excellent choice if you want to be able to change colors or choose a more custom shade.
Posted by Jesse Stamall on 12th Apr 2012
thanks Travis! I used these under my bartop here and thanks for the advice, these were better than the single colored ones.
1 Reel = 5 Meters, or 16.5 feet
These high quality 30/m RGB LED light strips can be changed to any color you desire. Choose between fading patterns, flashing patterns, solid state, and strobing.
Color changing LED lights can easily be installed and add may effects to your home, business, or vehicle. Each foot of our 5050 SMD LED flexible strip lighting uses only 2.2 watts per foot! You can bend the flex strip up to 90 degrees. This makes it very easy to install in corners, under cabinets, and surrounding architecture.
These bright color changing LED lights use 5050 SMD LED chips and can change color at the push of a button! Choose from hundreds of color combinations with either a color changing remote control. These high quality flexible LED strips can be cut to desired length to illuminate under kitchen cabinets, kickboards, bar tops, under cars, LCD TV backlight, and more! Many customers are looking for flashing LED lights for their signage or businesses. Our RGB LED remotes come with a setting for "flashing LED lights" where you can control how fast the LEDs flash. There are also settings besides flashing LEDs such as color changing, dimming, color scrolling, fading, and more!
If you order the RGB flexible strip light, you will NEED a controller.
Technical Details and Specifications for:
5050 SMD 30/meter RGB Flexible LED strips
- RGB color changing flexible LED strip. A ton of color possibilities!!!
- Flexible installation can be used on curved surfaces
- Can be sold by the foot or by 16.4ft (5 meters) reel. Up to 2 reels can be joined in series; however, many more can operate on the same remote by using RGB Amplifiers.
- 12v DC constant
- Fully Dimmable
- 120' degree wide angled beam
- 2165 Lumen per 16.4 feet
- 2.2 watts per foot!
- 36 watts per reel
- No hazardous materials such as lead and mercury!
- NO UV emissions
- 150 SMD LEDs per 16 feet
- Strip is 3/8 inch (10mm) wide
How long will the LED lights last?
Our RGB LED flex strip lights are rated at 50,000 hours. Thats a long time. Compare that to other lighting options!
Do you have Flashing LED lights?
Our RGB LED strip lights come with many settings, one of them being the ability to create Flashing LED lights for your home or business. Many customers use flashing LED lights for Christmas decorations, signage, club lighting, bar lighting, and car lighting.
Which Power source do I need?
The power source needed depends on the length that you cut the LED strip. Each foot uses 2.2 watts. Add the amount of feet together, multiply by 2.2, and you have the wattage used. You should add 20% more room in the power supply so take the wattage, and divide by .8 to get the power supply needed.
Example. 8 feet of RGB LED strip light. 8 X 2.2 watts = 17.6 total watts used. 17.6/.8= 22 watts. You need a power supply that will handle 22 watts.
Where are my RGB LEDs being shipped from?
ALL of our LED flex strips, LED controllers, LED adapters, and LED power supplies are assembled and shipped directly from northern California, USA.
Do I need any special tools?
With our solderless connectors, we make it very easy to DIY install LED flex strips. If you have some basic experience with electronics, you can also solder the ends yourself in no time.
How do I mount them where I want them?
3m double sided adhesive that is attached to the back works best! If you want something extra secure you can always add super glue or zip-ties will also do the trick. For most surfaces the 3M tape provided is sufficient.
Can I order in bulk and cut them myself?
LED strips are made to be cut to your desired length! Cut after every third LED.