Categories

Site Information

behars Loading... Please wait...

Categories

  • Image 1

3-Amp DC Female Coaxial Connector 5.5mm * 2.1mm

Brand Name:
Flexfire LEDs
SKU:
DC-F2.1
Shipping:
Calculated at checkout
Quantity:

Product Description

3-amp DC Coaxial LED Solderless Connector Adapter 5.5mm x 2.1mm

DC female connector installation with wire

Our lower amperage LED power supplies do not have terminals. They are similar to a laptop computer power supply. DC coaxial connectors make it easy to connect and disconnect flexible LED strip lights from the power supply, we sell these female 3-amp DC 2.1mm Coaxial Jack with wire attached.

They are the perfect size for the LED non-dimmable drivers sold on this site with the following SKUs:

  • 12V-DPS-2
  • 24V-DPS-2.5

If you purchased your LED driver somewhere else make sure you find out what size DC female connection you need.

Product Reviews

Write Review

  1. tidy

    Posted by S on 29th Nov 2015

    very useful connector for a tidy project

  2. Works great

    Posted by RB on 20th Mar 2015

    Good connector.

  3. Plug it in and your done

    Posted by Bob Pond on 26th Jul 2014

    This is such a slick way to connect. Perfect for this application. Add butt splices or a unique connector to the package and this is perfect. Can you imagine connecting this all up in 5 minutes? I can.

  4. Easy Power

    Posted by Jerome on 17th Jun 2013

    Great connector, works easily with most of the power supplies, no junction box or soldering needed for power. The wire is thin, so be careful when stripping.

  5. easy connection

    Posted by Unknown on 21st Mar 2013

    These connector's work well with the power supplies sold here. You just use two butt connectors to connect with the strip LEDs and plug into the proper power supply.

  6. DC Female Connector with pigtail convenient but possibly not necessary

    Posted by Jimini on 11th Mar 2013

    This connector provides an easy connect/disconnect to the DC power supply but possibly is not needed. One could cut off the coaxial cable coming from the DC power supply and connect the leads of the "solderless connector" directly to the leads from the power supply but I found it convenient to have a simple connector so that I wasn't trying to connect small wire leads inside my cupboard above the LED strips.

    The first connector sent to me actually had an electrical short between the two leads. I e-mailed the company and they sent another connector with no questions asked. It arrived two days later.

  7. Worked fine. Easy to use.

    Posted by Ron Karpola on 7th Mar 2013

    Easy to install.

  8. Works with the power supply

    Posted by Unknown on 6th Feb 2013

    I bought 2 of these. One was shorted, probably in the molded housing. The other was fine. No problems. I would have given it a 5 star both had worked. I'm sure flexfire would have replaced it, if I complained. But I just bought a bunch of products as a test for a new vendor. Everything works great. The LEDS are very bright. Although flexfire is more then superbrightleds. The LEDS are a lot brighter, which is exactly what I wanted.

  9. good product

    Posted by Unknown on 31st Oct 2012

    surprised at the quality of the connector.

  10. Remember to purchase these w/ power supplies!

    Posted by Dieter on 15th Jul 2012

    The power supplies with a black casing terminate their 12-volt output with a male DC connector. You need this female connector; otherwise you'll either be ordering some female connectors seperate, or cutting/splicing wires. Otherwise, the connectors mate together with a solid connection. Good product.

  11. The right part for the job!

    Posted by V on 1st Jul 2012

    This solderless connector was just what I needed to complete a project that I am working on; I am building a very thin (1/4") edgelit light panel. Thanks for the help :)


Specifications for this Hybrid LED light kit

Product Hybrid Bright White/Warm White LED Strip Light
Color Temperature 2900K for Warm White and 6500K for Bright White
Lumen (Brightness) 3450 Lumens per reel
Quantity per unit You will receive a continuous 16ft section of lights
UL Listed? Yes UL Listed, Must be used with class 2 power transformer
Working Voltage 12v DC
Dimmability Fully Dimmable
Beam Angle 120 Degrees
Rigid or Flexible?

-Flexible installation up to 90 degrees. Used on curved surfaces

Power consumption 2.92 watts per foot
UV emission No
LED Count per reel 600 LEDs
Warranty

2 years

Back to Top