Specification Download Sheet:
The UltraBright™ Architectural Series Bright White LED strip light is a 16ft 5in reel of high intensity LED chips on a flexible printed circuit board (PCB) with a strong adhesive backing. Sometimes referred to as "LED tape lights," the flexible design of LED strips allows for the addition of bright white light in basically any space you can imagine. In addition, these strips are a great choice for those looking to use energy more efficiently in their home or business because with LED strips you enjoy a lot more light at a fraction of the cost.
UltraBright™ Architectural Series bright white LED strips are great at providing elegant, discreet lighting and are commonly used by architects and lighting designers in professional lighting installations.
Top features and benefits:
- These strips are fully dimmable, and are a great selection for task lighting
- They're UL Listed, which means they have been independently verified as safe for use within home and business
- They produce 8,510 lumens per reel / 519 lumens per foot
Looking for less than a reel? Shop by the foot
Application and Use:
UL Listed UltraBright™ Bright White LED strip lights are installed in a wide variety of applications including:
- Under cabinet task lighting
- TV backlighting
- Under kickboards
- Display / jewelry case lighting
- Picture backlighting
- Bar and club lighting
- Architectural lighting
- Terrariums / indoor garden lighting
- Above cabinet lighting
- Under counter lighting
- Refrigerator lighting
- Cove lighting
Technical Details and Specifications:
|Product|| UltraBright™ Architectural Series Bright White LED strip light
|Color Temperature||6000K - 6500K|
|Lumen (Brightness)|| 8,510 per reel / 519 per foot
|Quantity per unit|| Sold by the 16ft 5in (5m) reel
|Working Voltage||24v DC constant voltage|
|Strip width||3/8in (10mm)|
|Beam Angle||120 Degrees|
|Can it be cut?||Yes, there is a cut line after every seventh LED|
|Power consumption|| 5.1 watts per foot
|CRI|| 80+ CRI (What is CRI?)
|Maximum run length||32ft 10in before running in parallel is required|
Very high lumen count per foot
Lumen count is the measurement of brightness. We encourage you to compare the lumen count of our strip lights to strips found elsewhere on the market. Doing so, you'll find that Flexfire LEDs carries the brightest strips with the highest lumen count among strips in their class.
Our UltraBright™ LED strips are UL Listed and use top quality 3014 LED chips, PCB, and resistors. This strip is rated for 50,000 hours of use before it will dim to 70% of its original brightness. We offer a 30-day money back guarantee and all of our strips come with a 3-year warranty.
UltraBright™ LED strips are the professional's choice
Flexfire LEDs is a preferred provider for international lighting designers, building contractors, renowned architects, and a diverse community of home owners and hobbyists from around the world. We know every detail there is to know about our lights and we're passionate about the benefits of LED technology. We want nothing more than to share our knowledge and passion with as many people as possible. Our LED specialists are here to assist in your project’s development from imagination to realization.
UltraBright™ LED strip light FAQ:
Which Power Supply do I need for my (x) feet of LEDs?
The length of LED strip lights of your project will determine the size of the power supply you need. View our Power Supply chart to find the exact LED power supply you need.
Which wire gauge do I need?
Different setups require different wire gauges (wire thickness) for safety and performance. The current and run length will determine the exact gauge of wire needed for your project. Read here for more information on how to select the correct wire gauge for your LED strip light installation as well as managing voltage drop.
Is there an outdoor option?
Yes, we do carry a water resistant Outdoor UltraBright™ Architectural Series Bright White LED strip light.
What do I need to turn on my lights?
To turn on LED strips, you will need to connect to a LED power supply. For connecting strips to the power supply we recommend soldering to make the strongest connections. Another option is to use our solderless connectors, which is a faster and easier way to install LED strips.
How do I mount the lights?
The 3M double sided adhesive that is found on the back of the LED strip allows you to install them in most locations. Be sure to thoroughly clean the surface to remove all dust and particulate matter before mounting the strip. Certain surfaces may require you to take additional measures to secure the strips lights into place. Feel free to call us with any questions.
Can I cut the strips myself?
Yes, LED strips are made to be cut to your desired length. Using sharp scissors, you can cut the strip every few inches (on a line that's marked after every third LED).
What is a 3014 SMD LED chip?
3014 SMD (Surface Mounted Diode) represents the size of the LED chips on the strip. A 3014 SMD chip measures at 3.0mm x 1.4mm. Click here for more information on LED chip sizes.
What is the importance of UL Listed?
UL is an acronym for the Underwriters Laboratories. They are an independent product safety certification organization. A good summary used by UL is, "a not-for-profit organization dedicated to public safety." This means you can install these LEDs in commercial spaces, industrial applications, and in your home with peace of mind.
More Information on LED Strip Lights:
Top 4 "need to know facts" about LED strip lights before purchasing - With a wide range of quality and price points in the market, it is important to educate yourself before buying. 90% of our customers found this page useful in selecting their LED strips
LED Strip Lighting Examples - The versatility of LED strips can be seen in the variety of projects our clients have completed. Looking for ideas? LED lighting example projects
Need assistance with your project or purchase? Our design specialists are ready to help.
Showing reviews 1-3 of 7 | Next
Posted by Phil, Newmarket, ON, Canada on 4th Jan 2015
Since we had just installed a new back-splash 3 walls) I wanted to replace my old tired fluorescent lights, so I started researching comparable LED strips. While there are many out there none came close enough to the light output we already had, until I found FlexFireLeds. We were not disappointed. It took a bit of planning since there are 3 separate segments controlled from the one place with a stove and a window separating the segments, but the result was worth the effort, absolutely spectacular :)
Posted by Barry Nuss Troy, MO on 11th Jun 2014
I normally don't write reviews...just don't have the time, but I couldn't resist.
I was looking for LED light strips for several used glass display cases I purchased. Unfortunately, I initially purchased the cheaper ones from another company. Bad move. The lights were not bright enough.
I called FlexFire and talked to a live person who understood and explained exactly what I needed and even processed the order right over the phone.
I received and installed the lights and I couldn't be happier. They are perfect for display cases and show off my products perfectly. These lights are not cheap, but there is a reason why. Well worth it.
Posted by Dave Short on 19th Jan 2014
Needed illumination for 2 pantries I was building. These exceeded my expectation for brightness and color. I ran mine thru a door activated switch.
Showing reviews 1-3 of 7 | Next